Eppendorf epMotion 5075 - Manual (Page 73)

Labware accessories
epMotion ® 5075
English (EN)
73
8.1.3 Rack LC
Abb. 8-3: Rack LC 100 μL
Fig. 8-3: Rack LC 100 μL
The Rack LC can hold 96 LightCycler capillaries with a 20 μL filling volume or 96 capillaries with a 100 μL
filling volume. The bores for both sizes of capillary are arranged in an alternating pattern.
The Rack LC is labeled on both sides. The label on one side indicates the capillary size of 20 μL. The label
on the other side indicates the capillary size of 100 μL.
8.1.3.1 Equipping the Rack LC and positioning it on the worktable
 Equip the Rack LC. Only use capillaries of the same size for a single application.
 Place the Rack LC on the epMotion worktable.
The label that lists the size of the inserted capillary must point toward the user.
8.1.4 Thermorack and Rack 0.5/1.5/2.0 mL
Thermoracks and the 0.5/1.5/2.0 mL racks have 24 bores for tubes with a volume of 1.5 mL and 2 mL.
Vessels with a volume of 0.5 mL can be inserted with adapter sleeves.
Thermoracks and 0.5/1.5/2.0 mL racks have lid holders. The lid holders are on the right, next to the bore for
the vessel. The lid holder vertically clamps the tube lids.
Thermoracks and the 0.5/1.5/2.0 mL racks are transported using the gripper.
Thermoracks are suitable for temperature control and designed for use on thermal modules.
Thermoracks can be cooled in the lab refrigerator.
Abb. 8-4: Thermorack 0.5 mL; 1.5 mL; 2 mL
Fig. 8-4: Thermorack 0.5 mL; 1.5 mL; 2 mL
Abb. 8-5: Rack 0.5 mL; 1.5 mL; 2 mL
Fig. 8-5: Rack 0.5 mL; 1.5 mL; 2 mL