Eppendorf epMotion 5075 - Manual (Page 66)

Labware – vessels, plates and pipette tips
epMotion
® 5075
English (EN)
66
7.4 epT.I.P.S. Motion
Abb. 7-10: epT.I.P.S. Motion 1 000 μL, 50μL, 300 μL
Fig. 7-10: epT.I.P.S. Motion 1 000 μL, 50μL, 300 μL
epT.I.P.S. Motion are special pipette tips for the epMotion.
epT.I.P.S. Motion pipette tips, racks and trays are made from polypropylene (PP). The filter is made of
polyethylene (PE).
Racks and trays are not transported with the gripper.
The optical sensor detects the size of the pipette tips via the rack coding. The optical sensor also detects if
the pipette tips have a filter. However, the optical sensor does not use the coding to detect if the pipette tips
are in racks, SafeRacks or in the Tip Holder.
NOTICE! Dispensing error due to incorrect handling of pipette tips.
Tips become deformed and change size during autoclaving.
 Do not autoclave the pipette tips. Use tips with the sterile specification, if required.
 Do not stack any racks that contain pipette tips.
Observe the instructions for use for the epT.I.P.S. Motion Racks and epT.I.P.S. Motion Reloads.