Eppendorf epMotion 5075 - Manual (Page 85)

Labware accessories
epMotion ® 5075
English (EN)
85
8.4.3 LiquidWasteTub with lid
Abb. 8-23: LiquidWasteTub with lid
Fig. 8-23: LiquidWasteTub with lid
The LiquidWasteTub is a container for liquid waste and is hung in the waste container. The LiquidWasteTub
has a working volume of 115 mL.
The optical sensor detects if the LiquidWasteTub is present. The optical sensor also detects the filling level
of the LiquidWasteTub.
The lid of the LiquidWasteTub prevents contamination from liquid waste splashes. The lid can only be used
with single-channel dispensing tools. If you are working with multi-channel dispensing tools, remove the
lid from the LiquidWasteTub.
The LiquidWasteTub can be reused. Decontamination and cleaning (see Decontamination and cleaning on
p. 97).
The equipping of the waste container with the LiquidWasteTub must be defined in the software.
WARNING! Danger due to contamination of the LiquidWasteTub.
The outer surface of the LiquidWasteTub may become contaminated by pipette tips in the
waste container.
 Wear personal protective equipment.
 Decontaminate the outer surface of the LiquidWasteTub.
1 Opening for dispensing tool
2 Opening for level detection
3 Lid
4 LiquidWasteTub
1
2
3
4