Eppendorf epMotion 5075 - Manual (Page 77)

Labware accessories
epMotion ® 5075
English (EN)
77
8.1.8 ReservoirRack 3
Abb. 8-9: ReservoirRack 3
Fig. 8-9: ReservoirRack 3
The ReservoirRack 3 can be used as a waste container for liquid waste.
The ReservoirRack 3 can be equipped with up to 3 reservoirs for 30 mL or 100 mL. The ReservoirRack 3
cannot be equipped with Reservoir Rack modules.
8.1.8.1 Positioning the Reservoir Rack 3 on the worktable
You can only position the ReservoirRack 3 in location A5 of the epMotion 5075m and 5075t.
 Place the ReservoirRack 3 on the worktable in such a way that the Reservoir Rack tabs are positioned
between the positioning pins for the location.
8.1.9 Reservoir Rack modules
Abb. 8-10: Versions of Reservoir Rack modules
Fig. 8-10: Versions of Reservoir Rack modules
Reservoir Rack modules are equipped with vessels and inserted into a Reservoir Rack. All of the vessels
equipped in a Reservoir Rack module must be of the same type.
The Reservoir Rack modules TC are suitable for temperature control.
1 Reservoir Rack module TC Ø 29 mm
2 Reservoir Rack module TC Ø 17 mm
3 Reservoir Rack module TC reservoir 100 mL
4 Reservoir Rack module TC reservoir 30 mL
5 Reservoir Rack module TC Ø 16 mm
6 Reservoir Rack module TC Ø 12 mm
7 Reservoir Rack module TC Safe-Lock
8 Reservoir Rack module TC PCR 0.5 mL
9 Reservoir Rack module TC PCR 0.2 mL
10 Reservoir Rack module TC Eppendorf tubes 5 mL