Eppendorf epMotion 5075 - Manual (Page 71)

Labware accessories
epMotion ® 5075
English (EN)
71
8 Labware accessories
8.1 Racks
Racks are holders for mounting the same type of individual vessels.
Racks are not transported with the gripper.
8.1.1 Racks for 24 vessels
Abb. 8-1: Rack for 24 vessels
Fig. 8-1: Rack for 24 vessels
Various racks are available for vessels 12 mm – 17 mm in diameter. Racks are available in 2 heights. The
bores for the vessels are numbered.
The racks cover the same area as plates. Racks can be positioned at any location.
Racks are coded. The optical sensor uses the code to detect if the rack is correctly positioned.
Vessels and accessories may not exceed an overall height of 126 mm. If this overall height is
exceeded, the software generates an error message.