Eppendorf epMotion 5075 - Manual (Page 78)

Labware accessories
epMotion
® 5075
English (EN)
78
8.1.9.1 Connecting 30 mL/100 mL TC Reservoir Rack modules to an adjacent module
Abb. 8-11: Connecting the 30 mL/100 mL TC Reservoir Rack module to an adjacent module
Fig. 8-11: Connecting the 30 mL/100 mL TC Reservoir Rack module to an adjacent module
The 30 mL/100 mL TC Reservoir Rack modules must be mounted to the next Reservoir Rack module using
2 connecting bars.
 Insert the 2 connecting bars for the TC Reservoir Rack modules in the next Reservoir Rack modules.
8.1.9.2 Setting the Reservoir Rack module to vessel height
Abb. 8-12: Setting the Reservoir Rack module to vessel height
Fig. 8-12: Setting the Reservoir Rack module to vessel height
The Reservoir Rack modules have bores 12 mm, 16 mm and 17 mm in diameter at the front and rear. The
bores are mounted at 50 mm, 60 mm, 70 mm, 80 mm and 90 mm. Use the 2 positioning screws to position
the vessels at these heights.
 Screw the 2 positioning screws into the bores at the required height.
1 Reservoir
2 30 mL/100 mL TC Reservoir Rack modules
3 Connecting web
4 Adjacent module
1 Positioning screw
In storage position
2 Positioning screw
At 50 mm height setting
3 Reservoir Rack module
1
2
3
4
2
1
3