Eppendorf epMotion 5075 - Manual (Page 61)

Labware – vessels, plates and pipette tips
epMotion ® 5075
English (EN)
61
7 Labware – vessels, plates and pipette tips
The term labware refers to epMotion consumables and accessories. Consumables are vessels, plates and
pipette tips. Accessories are adapters, blocks and racks. epBlue includes a definition for labware that is
placed on the epMotion worktable. The definition includes data on the geometry, tempering ability, volume
and bottom tolerance of the labware.
Abb. 7-1: Reaction vessel with lid
Fig. 7-1: Reaction vessel with lid
7.1 Tubes
The vessels will be inserted in racks. All reaction vessels which fit in an epMotion rack can be used.
Examples of reaction vessels that can be used:
• Safe-Lock tubes
• Standard reaction vessels 3810X
• PCR vessels
• Conical tubes/centrifuge tubes
• Cryotubes
Individual reaction vessels are not transported with the gripper.
Level measurement using the optical sensor is more difficult with 0.2 mL and 0.5 mL tubes.
Use Thermoracks or Reservoir Rack modules to temper vessels.
The epMotion can be used with a variety of labware from various manufacturers. Information
on how to expand the labware library can be found in the software operating manual.
Labware may not exceed an overall height of 126 mm. The software generates an error
message if this overall height is exceeded.
1 Filling volume
2 Working volume
3 Detection limit of optical sensor
4 Remaining volume
1.5
1.0
0.5
0.1
1
2
3
4