Apple Soundtrack Pro - Manual (Page 227)

Chapter 10 Working With Automation 227
Automating Effect and Send Parameters
You can automate effect parameters for tracks, busses, and outputs, and for audio file
projects by adding envelopes for the effect parameters, then adding and adjusting
envelope points. You can also automate send parameters for tracks by adding an
envelope for the send parameters, then adding and adjusting envelope points.
To add an envelope for an effect or send parameter:
1 Open the Effects tab and select the effect you want to automate.
2 In the Effect Parameters area, select the Auto checkbox for the parameter.
To remove an envelope for an effect parameter:
m Deselect the Auto checkbox for the parameter in the Effect Parameters area of the
Effects window.
The range of values for an effect or send parameter envelope is the same as the range
for the parameter in the Effects tab.
For detailed information on adjusting effect parameters, see “ Adjusting Realtime Effect
Parameters ” on page 209.
Click the Auto checkbox for
an effect parameter to add an
envelope for the parameter.