Apple Soundtrack Pro - Manual (Page 212)

212 Chapter 9 Working With Audio Effects
Adding Sends to Tracks
You can add sends to a realtime effects chain. When you add a send, the send is
added at the end of the current effects chain. You can move the send to another place
in the effects chain, choose the bus for a send, adjust send volume and pan, and
bypass a send.
To add a send to a track:
m In the Effects tab, click the Add Send button.
A send appears below the last effect in the track’s effects chain. You can assign the
send to a bus in the Effects tab or the Mixer.
Reordering Sends
You can reorder sends in the Effects tab or in the Mixer.
To reorder a send:
m In the Effect Parameters area or in the Mixer, drag the send up or down in the list to
change its order.
Choosing the Bus to Which a Send Is Routed
When you add a send, the audio is routed from the send to a bus. By default, the first
send you add to an effects chain is routed to Bus 1, the second send is routed to Bus 2,
and so on, if the default bus exists. Once you add a send, you can choose the bus to
which the send is routed.
To choose the bus to which a send is routed:
m In the Effect Parameters area of the Effects tab, choose a bus from the Send
pop-up menu.
Add Send button
Send pop-up menu