Sharp MX-2614N - Manual (Page 779)

7-111
SYSTEM SETTINGS
Contents
* This function is not available in some countries and regions.
‹ Transaction Report Print Select Setting
7-113
• Single Sending Print Out Error Report Only
• Broadcasting Print Out All Report
• Receiving No Printed Report
• Confidential Reception Print Out Notice Page
‹ Activity Report Print Select Setting
7-113 • Auto Print at Memory Full Disabled
• Print Daily at Designated Time Disabled
‹ ECM Enabled 7-113
‹ Distinctive Ring Detection * Off 7-113
‹ PBX Setting * Disabled 7-113
X Fax Send Settings 7-114
‹ Auto Reduction Sending Setting Enabled 7-114
‹ Rotation Sending Setting All Enabled 7-114
‹ Quick On Line Sending Enabled 7-114
‹ Printing Page Number at Receiver Enabled 7-114
‹ Date/Own Number Print Position Setting Outside the Original Image 7-114
‹ Recall in Case of Line Busy See " Country Differentiation Table "
(page 7-115).
7-115
‹ Recall in Case of Communication Error See " Country Differentiation Table "
(page 7-115).
7-115
X Fax Receive Settings 7-116
‹ Number of Calls in Auto Reception 2 7-116
‹ Switching from Manual to Automatic Reception * Disabled 7-116
‹ Duplex Reception Setting Disabled 7-116
‹ Auto Receive Reduce Setting Enabled 7-116
‹ Print Style Setting Auto Size Select 7-116
‹ Set the Telephone Number for Data Forwarding – 7-116
‹ Letter Size RX Reduce Print * Disabled 7-117
‹ Receiving Date & Time Print Off 7-117
‹ A3 RX Reduce * Disabled 7-117
‹ Fax Output Settings Varies depending on the machine
configuration
7-117
X Allow/Reject Number Setting All disabled 7-117
X Fax Polling Security Enabled 7-118
Item Factory default setting Page