Sharp MX-2614N - Manual (Page 191)

2-79
COPIER
Contents
Tab copying with a right binding
Originals Placing the originals Loading tab paper
• Document feeder tray
Insert the originals so that the side with no
tab text enters first.
Load the tab paper so that the tab on the
first sheet is away from you.
• Document glass
Place so that the side with the tab text is
on the left.
1
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
2
Select the special modes.
(1) Touch the [Special Modes] key.
(2) Touch the [Tab Copy] key.
☞
Special modes menu (1st screen) (page 2-41)
3
Set the tab width.
(1) Set the image shift width (tab width) with
the keys.
0 mm to 20 mm (0" to 5/8") can be entered.
You can also directly touch a numeric value display key to
change a number with the numeric keys.
(2) Touch the [OK] key.
You will return to the base screen of copy mode.
1
Final image
Originals 1
Reverse
side
1
Special Modes OK
Cancel OK Tab Copy
10
(0~20)
mm
Image Shift
Copy Original
(2) (1)