Sharp MX-2614N - Manual (Page 214)

2-102
COPIER
Contents
ADDING A WATERMARK TO A COPY (Watermark)
(On the MX-2314N, the productivity kit is required.)
When making a copy, specific text can be added to the copy as a watermark. The colour, density, angle, and pages (first
page only or all pages) can be selected for a watermark. The watermark is printed at the centre of the paper.
Printing "CONFIDENTIAL" on the paper
The following 12 selections are available for the stamp text.
Three levels can be selected for the density of the watermark.
Seven colours can be selected for the watermark colour.
The angle of a watermark can be selected in the range +90 degrees to -90 degrees in increments of 45 degrees.
CONFIDENTIAL PRIORITY PRELIMINARY FINAL
FOR YOUR INFO. DO NOT COPY IMPORTANT COPY
URGENT DRAFT TOP SECRET PLEASE REPLY
1
Touch the [Watermark] key in the stamp selection screen.
See steps 1 to 4 of " GENERAL PROCEDURE FOR USING STAMP " (page 2-85).
2
Touch the key of the watermark that you
wish to use.
CONFIDENTIAL
Cancel OK
PRIORITY CONFIDENTIAL
DO NOT COPY FOR YOUR INFO.
DRAFT URGENT
FINAL PRELIMINARY
COPY IMPORTANT
PLEASE REPLY TOP SECRET
Print Colour
All Pages
First Page
Angle
Stamp
Watermark
Bk 2 1 3
45
(+90 -90)