Sharp MX-2614N - Manual (Page 540)

5-57
SCANNER/INTERNET FAX
Contents
Specifying the original scan size (by numerical values)
When scanning a non-standard size original such as a card, follow these steps to specify the original size. The width can
be from 25 mm to 432 mm (1" to 17"), and the height can be from 25 mm to 297 mm (1" to 11-5/8").
1
Select the mode and display the image settings screen.
(1) Touch the tab of the mode that you wish to use.
(2) Touch the [Original] key.
The automatically detected original size appears to the right of the [Original] key.
☞
IMAGE SETTINGS (page 5-53)
2
Touch the [Scan Size] key.
3
Touch the [Size Input] key.
4
Enter the scan size (original size).
(1) Touch the X (width) numeric value display
key and enter the width.
(2) Touch the Y (height) numeric value display
key and enter the height.
(3) Touch the [OK] key.
Touch the [OK] key next to the [Cancel] key to complete
the setting and return to the screen of step 3.
You can also touch the keys to change the number.
Scan/Original OK
Auto Auto A4
Scan Size
2-Sided
Tablet 2-Sided
Booklet
Send Size 100%
Image Orientation
Auto
Scan/Original
Manual
OK
Size Input
A4
B5R B4
A3 A4 A5R
B5
216x343 216x340
A4R
A5
Long Size
AB
Inch
Size Input
Scan/Original OK
OK Cancel
420 X
Y 297 (50 297)
mm
(50 432)
mm
(1), (2) (3)