Sharp MX-2614N - Manual (Page 548)

5-65
SCANNER/INTERNET FAX
Contents
3
Set the format.
● Scanning in Mono2
(1) Select the file type.
(2) Select the compression mode.
● Scanning in colour/greyscale
(1) Touch the indicated key to select
[Colour/Grey] mode.
When [Colour/Grey] is highlighted, [Colour/Grey] mode is selected.
(2) Select the file type.
(3) Select the compression ratio.
• High results in a smaller file size, however, the image
quality is slightly degraded.
• When [High] is selected in the file format settings, the
compression ratio cannot be selected.
• The [Programmed] key does not appear in USB memory mode.
• When this screen is displayed, the setting screen of [B/W] mode initially appears.
• The format setting for [B/W] mode is the file format that is used when the [BLACK & WHITE START] key is pressed
with the B/W mode set to [Mono2].
• The format setting for [Colour/Grey] mode is the file format that is used when the [COLOUR START] key is pressed,
or when the [BLACK & WHITE START] key is pressed with the B/W mode set to [Greyscale].
• The file type of [B/W] mode and the file type of [Colour/Grey] mode are linked. The file type cannot be set separately
for each. (When [JPEG] is selected for [Colour/Grey] mode, [TIFF] is automatically selected for [B/W] mode.)
B/W
Colour/Grey
Scan/File Format
Specified Pages per File
File Type
(1-99)
OK
PDF
Encrypt PDF
PDF/A XPS
TIFF
Programmed
Compression Mode
None
MMR (G4)
MH (G3)
(1) (2)
B/W
Colour/Grey
Scan/File Format
Specified Pages per File
File Type
(1-99)
Compression Ratio
OK
Low
High
Medium
PDF
Encrypt PDF
PDF/A
Programmed
XPS
TIFF
JPEG
(2) (3) (1)