Sharp MX-2614N - Manual (Page 705)

7-37
SYSTEM SETTINGS
Contents
Printer Settings
* On the MX-2314N, the productivity kit is required.
Image Send Settings
Item Factory default setting Page
■ Printer Settings
7-78
●
Default Settings 7-78
X Prohibit Notice Page Printing Enabled 7-78
X Prohibit Test Page Printing Disabled 7-78
X A4/Letter Size Auto Change Varies depending on country and region 7-78
X Print Density Level
7-78 ‹ Colour 3
‹ Black & White 3
X CMYK Exposure Adjustment 0 7-78
X Bypass Tray Settings 7-78
‹ Enable Detected Paper Size in Bypass Tray Disabled 7-78
‹ Enable Selected Paper Type in Bypass Tray Enabled 7-78
‹ Exclude Bypass-Tray from Auto Paper Select Disabled 7-78
X Job Spool Queuing * Enabled 7-78
X Disabling of USB Memory Direct Print * Disabled 7-78
X Disabling of Network Folder Direct Print Disabled 7-78
●
Interface Settings 7-79
X Hexadecimal Dump Mode Disabled 7-79
X I/O Timeout 60 sec. 7-79
X Enable USB Port Enabled 7-79
X USB Port Emulation Switching Auto 7-79
X Enable Network Port Enabled 7-79
X Network Port Emulation Switching Auto 7-79
X Port Switching Method Switch at End of Job 7-79
●
Auto Colour Calibration – 7-80
Item Factory default setting Page
■ Image Send Settings
7-81
● Operation Settings 7-81
X Other Settings 7-81
‹ Default Display Settings Scan (fax when fax is installed)
7-81
• Hold settings for a while after scanning has been
completed
Disabled
‹ Address Book Default Selection Tab Switch: ABC, Address Type: All 7-81