Sharp MX-2614N - Manual (Page 704)

7-36
SYSTEM SETTINGS
Contents
Network Settings
*1 Depending on your machine specifications, only the items under "General Setting" will be displayed.
*2 This cannot be set on the machine. Set this in the system settings in the Web pages.
*3 On the MX-2314N, the productivity kit is required.
X Card Shot Settings
7-73 ‹ Original Size X: 86 mm (3-3/8"), Y: 54 mm (2-1/8")
‹ Fit to Page Disabled
X Initial Tab Copy Setting 10 mm (1/2") 7-73
X Disabling Deletion of Job Programs Disabled 7-74
X Disabling of Bypass-Tray in Duplex Copy Disabled 7-74
X Disabling of Auto Paper Selection Disabled 7-74
X
Auto Selection Setting of Tray that is Supplied the Paper Disabled 7-74
X B/W 600dpi x 600dpi Scanning Mode for Document Feeder Disabled 7-74
X B/W Quick Scan from Document Glass Enabled 7-74
●
Colour Adjustments 7-75
X Initial Colour Balance Setting Factory default state 7-75
X Auto Colour Calibration – 7-75
Item Factory default setting Page
■
Network Settings
7-76
● General Setting * 1 7-76
X IPv4 Settings DHCP 7-76
X IPv6 Settings Disabled 7-76
X Enable TCP/IP Enabled 7-76
X Enable NetWare Disabled 7-76
X
Enable EtherTalk Disabled 7-76
X Enable NetBEUI Disabled 7-76
X Reset the NIC – 7-76
X Ping Command – 7-76
● Connection Type Switching * 1 7-77
●
Wireless Settings * 1 7-77
● NAS Setting * 2, 3 7-77
Item Factory default setting Page