beautypg.com

Sharp MX-2614N User Manual

Page 46

background image

1-5

BEFORE USING THE MACHINE

Contents

INTERIOR

(16) Toner cartridges

These contain toner for printing. When the toner runs out
in a cartridge, the cartridge of the colour that ran out must
be replaced.

REPLACING THE TONER CARTRIDGES

(page 1-64)

(17) Fusing unit

Heat is applied here to fuse the transferred image onto
the paper.

(18) Transfer belt

During full colour printing, the toner images of each of the
four colours on each of the photoconductive drums are
combined together on the transfer belt. During black and
white printing, only the black toner image is transferred
onto the transfer belt.

(19) Right side cover

Open this cover to remove a misfeed.

(20) Paper reversing section cover

This is used when 2-sided printing is performed. Open
this cover to remove a paper misfeed.

(21) Bypass tray

Use this tray to feed paper manually.
When loading a large sheet of paper, be sure to pull out
the bypass tray extension.

LOADING PAPER IN THE BYPASS TRAY

(page 1-35)

(22) Main power switch

This is used to power on the machine.
When using the fax or Internet fax functions, keep this
switch in the "on" position.

TURNING THE POWER ON AND OFF

(page 1-15)

(23) Waste toner box

This collects excess toner that remains after printing.

REPLACING THE WASTE TONER BOX

(page 1-67)

(24) Waste toner box release lever

Move this lever when you need to release the waste
toner box lock to replace the waste toner box or clean the
laser unit.

CLEANING THE LASER UNIT

(page 1-60)

REPLACING THE WASTE TONER BOX

(page 1-67)

(25) Handle

Pull this out and grasp it when moving the machine.

(26) Right cover of paper drawer

(when a paper drawer is installed)
Open this to remove a paper misfeed in tray 2, tray 3 or
tray 4.

(27) Paper tray right side cover

Open this to remove a paper misfeed in tray 1.

(28) Right side cover release lever

To remove a paper misfeed, pull and hold this lever up to
open the right side cover.

(16)

(17)

(18)

(21)

(20)

(19)

(24)

(23)

(27) (28)

(26)

(25)

(22)

Caution

The fusing unit is hot. Take care not to burn yourself
when removing a paper misfeed.

Do not touch or damage the transfer belt. This may
cause a defective image.

Your service technician will collect the waste toner
box.

This manual is related to the following products: