Sharp MX-2614N User Manual
Page 448
4-103
INITIATING POLLING RECEPTION MANUALLY
Use this procedure when you must start polling after listening to a recorded greeting, such as when using a fax
information service.
• Make sure that an original is not placed in the machine when using the polling reception function.
• This function cannot be used to poll multiple machines (serial polling).
1
Enter the destination fax number.
(1) Touch the [Speaker] key.
You will hear the dial tone through the machine's speaker.
(2) Touch the [Address Book] key in the base
screen.
(3) Touch the one-touch key of the desired
destination.
A group key cannot be used.
• In addition to specification by one-touch key, a destination can also be specified using a search number. You can
also directly enter a fax number with the numeric keys or look up a destination in a global address book. For more
information, see "
" (page 4-17).
• After touching the [Speaker] key, you can touch the [Speaker Volume] key to adjust the volume of the speaker. The
speaker volume changes each time the [Speaker Volume] key is touched. Adjust the volume to the desired level.
2
Receive the fax.
(1) Touch the [Special Modes] key.
☞
(2) Touch the
keys to switch through the
screens.
(3) When you hear the fax tone, touch the
[Polling] key.
The fax is received.
• This function can only be used when the other machine is Super G3 or G3 compatible and has a polling function.
• The receiving machine bears the expense (phone charges) of the polling reception.
Sort Address
1
2
III III
GGG GGG
EEE EEE
CCC CCC
AAA AAA
JJJ JJJ
HHH HHH
FFF FFF
DDD DDD
BBB BBB
10
5
15
Speaker Volume
To
Cc
Telephone mode.
Fax Manual
Reception
Resend
Speaker
Freq.
ABCD
EFGH
IJKL
MNOP
QRSTU
VWXYZ
etc.
Condition
Settings
(3)
(1)
Transaction
Report
Own Name
Select
Verif.
Stamp
Memory Box
Polling
OK
Fax/Special Modes
2
2
(2)
(3)