Raid controller kit-g ? host-based raid solution, Raid controller kit-g – host-based raid solution – Toshiba Magnia 560S User Manual
Page 28
RAID Controller Kit-G – Host-Based RAID Solution
10
Introduction to RAID
Table 2.1 Topics in this Chapter (Continued)
Major Topic
Subtopic
Turn to
Disk striping
page 13
Disk mirroring
page 14
Disk spanning
page 15
Parity
page 16
Hot spares
page 16
Hot swap
page 16
Disk rebuilds
page 17
Logical drive states
page 18
SCSI drive states
page 18
Disk array types
page 19
Enclosure management
page 19
RAID Controller Kit-G – Host-Based RAID
Solution
RAID products are either:
•
Host-based, or
•
External
The RAID Controller Kit-G controller is a host-based RAID solution. RAID Controller
Kit-G is a PCI adapter card that is installed in any available PCI expansion slot in a host
system.
Host-Based
A host-based RAID product puts all of the RAID intelligence on an adapter card that is
installed in a network server. A host-based RAID product provides the best
performance. RAID Controller Kit-G is part of the file server, so it can transmit data
directly across the computer’s buses at data transfer speeds up to 532 MB/s.
The available sequential data transfer rate is determined by the following factors:
•
The sustained data transfer rate on the motherboard PCI bus
•
The sustained data transfer rate on the GC80302 PCI-to-PCI bridge
•
The sustained data transfer rate of the SCSI controller
•
The sustained data transfer rate of the SCSI devices
•
The number of SCSI channels
•
The number of SCSI disk drives
Host-based solutions must provide operating system-specific drivers.