Toshiba Magnia 560S - Manual (Page 114)

Starting the MegaRAID BIOS Configuration Utility 96
MegaRAID BIOS Configuration Utility
IMPORTANT: MegaRAID supports one to four SCSI channels, but many of
the screens in this manual show three SCSI channels. The utilities described in
this manual also work with other MegaRAID models that support one, two,
three or four channels.
When you press , the Management Menu displays.
BIOS Configuration Utility Menu Options
Table 9.1 describes the BIOS Configuration Utility main menu options.
Table 9.1 BIOS Configuration Utility Main Menu Options
Option Description
Configure Select this option to configure physical arrays and logical drives.
Initialize Select this option to initialize one or more logical drives.
Objects Select this option to individually access controllers, logical drives,
and physical drives.
Format Select this option to low-level format hard disk drives.
Rebuild Select this option to rebuild failed disk drives.
Check
Consistency Select this option to verify that the redundancy data in logical
drives using RAID level 1 or 5 is correct.
Select Adapter Select this option to select a MegaRAID host adapter to work on.
This menu item appears only if more than one MegaRAID host
adapter is installed in the computer.