Toshiba Magnia 560S - Manual (Page 168)

MegaRAID Service Monitor 150
Installing Power Console Plus
MegaRAID Service Monitor
The MegaRAID Service Monitor program is a Windows NT Service Process. The
monitor program tracks status changes for hardware devices. The monitor program
runs in the background. It polls the status of the resources connected to the MegaRAID
adapters every 10 to 15 seconds.
The monitor program, MegaRAID Service Monitor, is part of the Power Console Plus
installation package. The monitor program is installed as a service and is loaded
automatically. If installed, this program logs peripheral device activities and status
changes to Event Viewer.
Event Viewer logs changes whether Power Console Plus is running or not. The changes
are also stored in View Log, which records changes only when Power Console Plus is
running. Status changes are stored in the MEGARAID.LOG file. This filename could
be different if the system has been customized. The contents of the displayable activity
log include all status changes and device activities.
The filename for the MegaRAID Service Monitor is MEGASERV.EXE.
Installing the MegaRAID Service Monitor
Installation is done through Power Console Plus Installshield.
1. Insert the MegaRAID Drivers & Utilities in the CD-ROM drive.
2. Click on Start, click on Run, and choose Browse for the CD-ROM.
3. Select SETUP.EXE from Power Console Plus installation CD and click on OK.
4. Select MegaRAID Service Monitor from the menu. The MegaRAID Service
Monitor is now installed.
Editing the HOSTS File for a RAID Server
Use the following procedure if installing Power Console Plus on a server that is not a
registration server.
1. Type:
LOAD EDIT
at the NetWare prompt and press .
2. Press the key and select SYS volume.
3. Select the ETC directory. Select the Hosts file and press .
4. Add the TCP/IP address and name of the registration server.