Toshiba Magnia 560S - Manual (Page 229)

Power Console Plus Internal Messages
MegaRAID Service Monitor
211
MegaRAID Service
Monitor
Power Console Plus does not run as a Windows NT Service. The MegaRAID Service
Monitor does runs as a Windows NT service. It logs events to the Application log
(MEGARAID.LOG) under Windows NT.
Power Console Plus Internal Messages
Table C.1 lists the messages that Power Console Plus logs to RAID.LOG.
Table C.1 Power Console Plus Messages
Message # Message
1 Power Console Plus has been started again.
2 An adapter change has occurred.
3 Notify messages:
Drive state change
Start a reconstruction
Enclosure alert
etc.
4 Begin any operation (initialize, rebuild, etc.) on any physical
or logical drive.
5 An error occurred during an operation (initialize, rebuild, etc.)
on a physical or logical drive.
6 Complete any operation (initialize, rebuild, etc.) on any
physical or logical drive.
7 Successfully abort any operation (initialize, rebuild, etc.) on
any physical or logical drive.
8 An error occurred while attempting to abort any operation
(initialize, rebuild, etc.) on any physical or logical drive.
9
Failure to start any operation (such as an initialize) on a
logical drive.
10
Drive state change for any channel and target.
11
Configuration file written.
12
SCSI sense data.
13
Battery status.