Introduction – Toshiba Magnia 560S User Manual
Page 107
Introduction
Introduction
89
Introduction
The basic MegaRAID documentation is contained in three manuals:
•
MegaRAID Configuration Software Guide
This manual provides information about MegaRAID software utility programs. You
will not need this manual until after you have planned your RAID system and have
installed the MegaRAID controller.
RAID system planning, installation, and configuration information is provided in the
MegaRAID Hardware Guide for your MegaRAID board. Read the MegaRAID
Hardware Guide before you read the MegaRAID Configuration Software Guide.
•
MegaRAID Hardware Guide
Each MegaRAID board has a MegaRAID hardware guide that contains information
about installing the MegaRAID controller. It also contains general introductory
information about RAID and RAID system planning and configuration information.
You must read the MegaRAID Hardware Guide before you read the MegaRAID
Configuration Software Guide.
•
MegaRAID Operating System Drivers Guide
This manual provides all the information you will need to install the appropriate
operating system software drivers.
Read this manual after you have installed the MegaRAID card, planned the RAID
system, and configured the system using the MegaRAID software configuration
utilities described in the MegaRAID Configuration Software Guide.