Toshiba Magnia 560S - Manual (Page 147)

Scan Devices
WebBIOS Configuration Utility
129
Scan Devices
When you select the Scan Devices option, WebBIOS checks the physical and logical
drives to see if there are any changes to the drive status. It displays the results of the
scan on the main screen in the physical and logical drives section. For example, if a
physical drive has failed, the words "Not Responding" display to the right of the drive
name under the Physical Drives heading.
SCSI Channel Properties
The following screen displays when you select SCSI Channel Properties from the
MegaRAID WebBIOS main screen:
Table 10.3 describes the SCSI channel properties.
Table 10.3 SCSI Channel Properties
Option Description
Channel Width Displays the number of bits that can pass
through the channel at one time.
Termination Use this option to enable or disable SCSI
termination.
SCSI Capabilities Use this option to select Fast, Ultra, Ultra 2,
Ultra160, or Ultra320 as the SCSI capability.