Ipv6 tftp server file upload – Brocade Communications Systems Brocade ICX 6650 User Manual
Page 83
Brocade ICX 6650 Administration Guide
65
53-1002600-01
Loading and saving configuration files with IPv6
3
This command copies a device running configuration to a TFTP server with the IPv6 address of
2001:DB8:e0ff:7837::3 and names the destination file bakrun.cfg.
Syntax: ncopy running-config | startup-config tftp
Specify the running-config keyword to copy the device running configuration or the startup-config
keyword to copy the device startup configuration.
The tftp
address in hexadecimal using 16-bit values between colons as documented in RFC 2373.
The
copied to the IPv6 TFTP server.
IPv6 TFTP server file upload
You can upload the following files from an IPv6 TFTP server:
•
Primary boot image.
•
Secondary boot image.
•
Running configuration.
•
Startup configuration.
Uploading a primary or secondary boot image from an IPv6 TFTP server
For example, to upload a primary or secondary boot image from an IPv6 TFTP server to a device
flash memory, enter a command such as the following.
Brocade#ncopy tftp 2001:DB8:e0ff:7837::3 primary.img flash primary
This command uploads the primary boot image named primary.img from a TFTP server with the
IPv6 address of 2001:DB8:e0ff:7837::3 to the device primary storage location in flash memory.
Syntax: ncopy tftp
The tftp
address in hexadecimal using 16-bit values between colons as documented in RFC 2373.
The
server.
The primary keyword specifies the primary location in flash memory, while the secondary keyword
specifies the secondary location in flash memory.
Uploading a running or startup configuration from an IPv6 TFTP server
For example to upload a running or startup configuration from an IPv6 TFTP server to a device,
enter a command such as the following.
Brocade#ncopy tftp 2001:DB8:e0ff:7837::3 newrun.cfg running-config
This command uploads a file named newrun.cfg from a TFTP server with the IPv6 address of
2001:DB8:e0ff:7837::3 to the device.
Syntax: ncopy tftp