Setting the alarm interval, Displaying information about installed media – Brocade Communications Systems Brocade ICX 6650 User Manual
Page 244
226
Brocade ICX 6650 Administration Guide
53-1002600-01
Digital optical monitoring
9
Setting the alarm interval
You can optionally change the interval between which alarms and warning messages are sent. The
default interval is three minutes. To change the interval, use the following command.
Brocade(config)#interface ethernet 1/1/1 to 1/1/2
Brocade(config-mif-1/1/1-1/1/2)#optical-monitor 10
Syntax: [no] optical-monitor [
For
messages.
NOTE
The commands no optical-monitor and optical-monitor 0 perform the same function. That is, they
both disable digital optical monitoring.
Displaying information about installed media
Use the show media, show media slot, and show media ethernet commands to obtain information
about the media devices installed per device, per slot, and per port. The results displayed from
these commands provide the Type, Vendor, Part number, Version and Serial number of the SFP,
SFP+, or XFP optical device installed in the port. If there is no SFP, SFP+, or XFP optical device
installed in a port, the “Type” field will display “EMPTY”.
Use the show media command to obtain information about the media devices installed in a device.
Brocade#show media
Port 1/1/1: Type : 10GE Twinax 1M (SFP +)
Port 1/1/2: Type : 10GE Twinax 1M (SFP +)
Port 1/1/3: Type : 10GE Twinax 1M (SFP +)
Port 1/1/4: Type : 10GE Twinax 1M (SFP +)
Port 1/1/5: Type : 1G M-TX(SFP)
Port 1/1/6: Type : 1G M-TX(SFP)
Port 1/1/7: Type : EMPTY
Port 1/1/8: Type : EMPTY
Port 1/1/9: Type : 10GE Twinax 3M (SFP +)
Port 1/1/10: Type : 10GE Twinax 3M (SFP +)
Port 1/1/11: Type : EMPTY
Port 1/1/12: Type : EMPTY
Port 1/1/13: Type : EMPTY
Port 1/1/14: Type : EMPTY
Port 1/1/15: Type : 10GE SR 300m (SFP +)
Port 1/1/16: Type : EMPTY
Port 1/1/17: Type : EMPTY
Port 1/1/18: Type : EMPTY
Port 1/1/19: Type : EMPTY
Port 1/1/20: Type : EMPTY
Port 1/1/21: Type : EMPTY
Port 1/1/22: Type : EMPTY
Port 1/1/23: Type : EMPTY
Port 1/1/24: Type : EMPTY
Port 1/1/25: Type : 10GE Twinax 3M (SFP +)
Port 1/1/26: Type : 10GE Twinax 3M (SFP +)
Port 1/1/27: Type : EMPTY
Port 1/1/28: Type : EMPTY
Port 1/1/29: Type : EMPTY