Brocade Communications Systems Brocade ICX 6650 - Manual (Page 72)

54 Brocade ICX 6650 Administration Guide
53-1002600-01
Using SNMP to upgrade software
3
Syntax: show dir
To display the contents of a flash configuration file, enter a command such as the following from
the User EXEC or Privileged EXEC mode of the CLI:
Syntax: copy flash console <filename>
For <filename>, enter the name of a file stored in flash memory.
Using SNMP to upgrade software
You can use a third-party SNMP management application such as HP OpenView to upgrade
software on a Brocade device.
Brocade#show dir
12703628 [4e58] primary
12706082 [4e58] secondary
668 [0000] $$$license
463 [0000] startup-config.backup
512 [0000] meta_data.bin
432 [0000] startup-config
25411785 bytes 6 File(s)
21843968 bytes free
Brocade#copy flash console startup-config.backup
ver 07.5.00RC1T323
!
stack unit 1
module 1 icx6650-64-56-port-management-module
module 2 icx6650-64-4-port-160g-module
module 3 icx6650-64-8-port-80g-module
!
!
!
!
!
!
!
!
!
!
ip default-network 10.20.68.129/8
!
!
interface management 1
ip address 10.20.68.144 255.255.255.0
!
!
!
!
!