Brocade Communications Systems Brocade ICX 6650 - Manual (Page 249)

Brocade ICX 6650 Administration Guide 231
53-1002600-01
Chapter
10
Syslog
In this chapter
• About Syslog messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232
• Displaying Syslog messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232
• Syslog service configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234
Table 50 lists the Brocade ICX 6650 switch and the Syslog features the switch supports. These
features are supported in full Layer 3 software images, except where explicitly noted.
This chapter describes how to display Syslog messages and how to configure the Syslog facility,
and lists the Syslog messages that Brocade ICX 6650 devices can display during standard
operation. Refer to
“Syslog” on page 231 for a list of Syslog messages.
TABLE 50 Supported Syslog features
Feature Brocade ICX
6650
Syslog messages Yes
Real-time display of Syslog messages Yes
Real-time display for Telnet or SSH
sessions Yes
Show log on all terminals Yes
Time stamps Yes
Multiple Syslog server logging (up to 6
Syslog servers) Yes
Disabling logging of a message level Yes
Changing the number of entries the local
buffer can hold Yes
Changing the log facility Yes
Displaying Interface names in Syslog
messages Yes
Displaying TCP and UDP port numbers in
Syslog messages Yes
Retaining Syslog messages after a soft
reboot Yes
Clearing Syslog messages from the local
buffer Yes