Brocade Communications Systems Brocade ICX 6650 - Manual (Page 291)

Brocade ICX 6650 Administration Guide 273
53-1002600-01
Appendix
A
Syslog messages
Table 57 lists all of the Syslog messages. Note that some of the messages apply only to Layer 3
Switches.
NOTE
This chapter does not list Syslog messages that can be displayed when a debug option is enabled.
The messages are listed by message level, in the following order, then by message type:
• Emergencies (none)
• Alerts
• Critical
• Errors
• Warnings
• Notifications
• Informational
• Debugging
TABLE 57 Brocade Syslog messages
Message level Message Explanation
Alert modules and 1 power
supply, need more power supply!! Indicates that the chassis needs more
power supplies to run the modules in the
chassis.
The parameter indicates
the number of modules in the chassis.
Alert Fan , , failed A fan has failed.
The is the fan number.
The describes where the failed
fan is in the chassis.
Alert MAC Authentication failed for
on RADIUS authentication was successful for
the specified on the
specified ; however, the VLAN
returned in the RADIUS Access-Accept
message did not refer to a valid VLAN or
VLAN ID on the Brocade device. This is
treated as an authentication failure.
Alert MAC Authentication failed for
on (Invalid User) RADIUS authentication failed for the
specified on the specified
because the MAC address sent
to the RADIUS server was not found in the
RADIUS server users database.