Brocade Communications Systems Brocade ICX 6650 - Manual (Page 167)

Brocade ICX 6650 Administration Guide 149
53-1002600-01
Displaying global IPv6 information
5
To display detailed information about a specified TCP connection, enter a command such as the
following at any CLI level.
Syntax: show ipv6 tcp status
The parameter can be the IPv4 or IPv6 address of the local interface over which
the TCP connection is taking place.
The parameter is the local port number over which a TCP connection is taking
place.
The parameter can be the IPv4 or IPv6 address of the remote interface over
which the TCP connection is taking place.
The parameter is the local port number over which a TCP connection is
taking place.
FREE TCP QUEUE BUFFER =
The percentage of free TCP queue buffer space.
FREE TCP SEND BUFFER =
The percentage of free TCP send buffer space.
FREE TCP RECEIVE BUFFER =
The percentage of free TCP receive buffer space.
FREE TCP OUT OF SEQUENCE BUFFER
= The percentage of free TCP out of sequence buffer space.
TABLE 35 General IPv6 TCP connection fields (Continued)
Field Description
Brocade#show ipv6 tcp status 2001:DB8::110 179 2000:4::106 8222
TCP: TCP = 0x217fc300
TCP: 2000:4::110:179 <-> 2000:4::106:8222: state: ESTABLISHED Port: 1
Send: initial sequence number = 242365900
Send: first unacknowledged sequence number = 242434080
Send: current send pointer = 242434080
Send: next sequence number to send = 242434080
Send: remote received window = 16384
Send: total unacknowledged sequence number = 0
Send: total used buffers 0
Receive: initial incoming sequence number = 740437769
Receive: expected incoming sequence number = 740507227
Receive: received window = 16384
Receive: bytes in receive queue = 0
Receive: congestion window = 1459