Brocade Communications Systems Brocade ICX 6650 User Manual
Page 302
284
Brocade ICX 6650 Administration Guide
53-1002600-01
Syslog messages
A
Notification
ACL system fragment packet inspect rate
The fragment rate allowed on the device
has been exceeded.
The
allowed.
This message can occur if fragment
thottling is enabled.
Notification
Authentication Disabled on
The multi-device port authentication feature
was disabled on the on the specified
Notification
Authentication Enabled on
The multi-device port authentication feature
was enabled on the on the specified
Notification
BGP Peer
Indicates that a BGP4 neighbor has gone
down.
The
neighbor BGP4 interface with the Brocade
device.
Notification
BGP Peer
Indicates that a BGP4 neighbor has come
up.
The
neighbor BGP4 interface with the Brocade
device.
Notification
DHCP : snooping on untrusted port
Indicates that the DHCP client receives
DHCP server reply packets on untrusted
ports, and packets are dropped.
Notification
DOT1X issues software but not physical port
down indication of Port
software applications
The device has indicated that the specified
is no longer authorized, but the actual port
may still be active.
Notification
DOT1X issues software but not physical port
up indication of Port
software applications
The device has indicated that the specified
port has been authenticated, but the actual
port may not be active.
Notification
DOT1X: Port
-user
authentication
The RADIUS session has timed out for this
802.1x port.
Notification
Local ICMP exceeds
packets, stopping for
The number of ICMP packets exceeds the
burst command. The Product Name device
may be the victim of a Denial of Service
(DoS) attack.
All ICMP packets will be dropped for the
number of seconds specified by the
expires, the packet counter is reset and
measurement is restarted.
TABLE 57
Brocade Syslog messages (Continued)
Message level
Message
Explanation