Brocade Communications Systems Brocade ICX 6650 - Manual (Page 112)

94 Brocade ICX 6650 Administration Guide
53-1002600-01
Viewing information about PoD licenses
4
Table 19 describes the information displayed by the show license unit unit_id [index
index_number] command.
Displaying the license configuration for PoD ports
for the Brocade ICX 6650
To display the license configuration for PoD ports in the system, enter the show pod command at
the CLI level. In the following output, the 16-port capacity license is used for the 10 GbE PoD
license, and the 6-port capacity license is used for the 40 GbE PoD license.
TABLE 19 Output from the show license unit_id [index index_number] command
Field Description
+license name The name of the license installed on the unit.
+lid The license ID. This number is embedded in the Brocade device.
+license type Indicates the license is normal (permanent).
+status Indicates the status of the license:
•
Valid – A license is valid if the LID matches the serial number of the
device for which the license was purchased, and the package name
is recognized by the system.
•
Invalid – The LID does not match the serial number of the device
for which the license was purchased.
•
Active – The license is valid and in effect on the device.
•
Not used – The license is not in effect on the device.
+license period The license type is normal (permanent), This field displays Unlimited.