Syslog messages for port flap dampening – Brocade Communications Systems Brocade ICX 6650 User Manual
Page 60

42
Brocade ICX 6650 Administration Guide
53-1002600-01
Basic port parameter configuration
2
defines the port flap dampening statistics displayed by the show link-error-disable all
command.
Syntax: show link-error-disable [all]
Syslog messages for port flap dampening
The following Syslog messages are generated for port flap dampening.
•
If the threshold for the number of times that a port link toggles from “up” to “down” then
“down” to “up” has been exceeded, the following Syslog message is displayed.
0d00h02m10s:I:ERR_DISABLE: Link flaps on port ethernet 16 exceeded threshold;
port in err-disable state
•
If the wait time (port is down) expires and the port is brought up the following Syslog message
is displayed.
0d00h02m41s:I:ERR_DISABLE: Interface ethernet 16, err-disable recovery timeout
TABLE 10
Output of show link-error-disable
Column
Description
Port #
The port number.
Threshold
The number of times the port link state will go from up to down and
down to up before the wait period is activated.
Sampling-Time
The number of seconds during which the specified toggle threshold can
occur before the wait period is activated.
Shutoff-Time
The number of seconds the port will remain disabled (down) before it
becomes enabled. A zero (0) indicates that the port will stay down until
an administrative override occurs.
State
The port state can be one of the following:
•
Idle – The link is normal and no link state toggles have been
detected or sampled.
•
Down – The port is disabled because the number of sampled errors
exceeded the configured threshold.
•
Err – The port sampled one or more errors.
Counter
•
If the port state is Idle, this field displays N/A.
•
If the port state is Down, this field shows the remaining value of the
shutoff timer.
•
If the port state is Err, this field shows the number of errors
sampled.
Brocade# show link-error-disable all
Port -----------------Config--------------- ------Oper----
# Threshold Sampling-Time Shutoff-Time State Counter
------- --------- ------------- ------------ ----- -------
1/1/3 1 14 3 Idle N/A
1/1/32 2 20 Indefinite Idle N/A
1/1/56 1 10 Indefinite Down N/A
1/2/1 10 3 10 Idle N/A
1/3/4 4 10 2 Idle N/A
1/3/8 1 10 Indefinite Idle N/A