Brocade Communications Systems Brocade ICX 6650 - Manual (Page 229)

Brocade ICX 6650 Administration Guide 211
53-1002600-01
LLDP-MED configuration
8
Configuring civic address location
When you configure a media Endpoint location using the address-based location, you specify the
location the entry refers to, the country code, and the elements that describe the civic or postal
address.
To configure a civic address-based location for LLDP-MED, enter commands such as the following
at the Global CONFIG level of the CLI.
Brocade(config)#lldp med location-id civic-address refers-to client country US
elem 1 CA elem 3 “Santa Clara” elem 6 “4980 Great America Pkwy” elem 24 95054 elem
27 5 elem 28 551 elem 29 office elem 23 “John Doe”
Syntax: [no] lldp med location-id civic-address refers-to country elem
type> [elem ] [elem ]....
refers-to describes the location that the entry refers to. Specify one of the following:
• client
• dhcp-server
• network-element
where dhcp-server or network-element should only be used if it is known that the Endpoint is in
close physical proximity to the DHCP server or network element.
is the two-letter ISO 3166 country code in capital ASCII letters.
Example
• CA – Canada
• DE – Germany
• JP – Japan
• KR – Korea
• US – United States
is a value from 0 – 255, that describes the civic address element. For example, a CA
type of 24 specifies a postal or zip code. Valid elements and their types are listed in
Table 46 .
is the actual value of the elem , above. For example, 95123 for the postal or zip
code. Acceptable values are listed in
Table 46 , below.
NOTE
If the value of an element contains one or more spaces, use double quotation marks (“) at the
beginning and end of the string. For example, elem 3 “Santa Clara”.
+ MED Location ID
Data Format: Coordinate-based
Latitude Resolution : 20 bits
Latitude Value : -78.303 degrees
Longitude Resolution : 18 bits
Longitude Value : 34.27 degrees
Altitude Resolution : 16 bits
Altitude Value : 50. meters
Datum : WGS 84