Brocade Communications Systems Brocade ICX 6650 - Manual (Page 71)

Brocade ICX 6650 Administration Guide 53
53-1002600-01
Image file types
3
In the previous example, the codes did not match, and verification failed. If verification succeeds,
the output will look like this.
Brocade#verify md5 secondary 01c410d6d153189a4a5d36c955653861
Brocade#.........................Done
Size = 2044830, MD5 01c410d6d153189a4a5d36c955653861
Verification SUCEEDED.
The following examples show this process for SHA-1 and CRC32 algorithms.
Brocade#verify sha secondary 49d12d26552072337f7f5fcaef4cf4b742a9f525
Brocade#.........................Done
Size = 2044830, sha 49d12d26552072337f7f5fcaef4cf4b742a9f525
Verification SUCCEEDED.
and
Brocade#verify crc32 secondary b31fcbc0
Brocade#.........................Done
Size = 2044830, CRC32 b31fcbc0
Verification SUCCEEDED.
Image file types
This section lists the uboot, router, and switch image file types supported and how to install them
on the Brocade ICX 6650 switches. For information about a specific version of code, refer to the
release notes.
Software upgrades
Refer to the release notes for instructions about upgrading the software.
Viewing the contents of flash files
The copy flash console command can be used to display the contents of a configuration file,
backup file, or renamed file stored in flash memory. The file contents are displayed on the console
when the command is entered at the CLI.
To display a list of files stored in flash memory, enter the show files command at the device
configuration prompt.
The following shows an example command output.
TABLE 13 Software image files
Product uboot image Router image Switch image
Brocade ICX 6650 fxz07500.bin fxz07500.bin ICXLR07500.bin