Brocade Communications Systems Brocade ICX 6650 - Manual (Page 263)

Brocade ICX 6650 Administration Guide 245
53-1002600-01
Basic system management
11
Brocade#show ?
Syntax: show
You also can enter “show” at the command prompt, then press the TAB key.
Viewing port statistics
Port statistics are polled by default every 10 seconds.
You can view statistics for ports by entering the following show commands:
• show interfaces
• show configuration
• show statistics
To display the statistics, enter a command such as the following.
Syntax: show statistics [ethernet //
Specify the Ethernet port in the // format. Stack-unit is 1.
Table 53 lists the statistics displayed in the output of the show statistics command.
TABLE 53 Port statistics
Parameter Description
Port configuration
Port The port number.
Link The link state.
Brocade#show statistics ethernet 1/1/1
Port Link State Dupl Speed Trunk Tag Priori MAC Name
1/1/1 Up Forward Half 100M None No level0 748e.f80c.5f40
Port 1/1/1 Counters:
InOctets 3200 OutOctets 256
InPkts 50 OutPkts 4
InBroadcastPkts 0 OutBroadcastPkts 3
InMulticastPkts 48 OutMulticastPkts 0
InUnicastPkts 2 OutUnicastPkts 1
InBadPkts 0
InFragments 0
InDiscards 0 OutErrors 0
CRC 0 Collisions 0
InErrors 0 LateCollisions 0
InGiantPkts 0
InShortPkts 0
InJabber 0
InFlowCtrlPkts 0 OutFlowCtrlPkts 0
InBitsPerSec 264 OutBitsPerSec 16
InPktsPerSec 0 OutPktsPerSec 0
InUtilization 0.00% OutUtilization 0.00%