Operations, administration, and maintenance, Chapter 3, Chapter – Brocade Communications Systems Brocade ICX 6650 User Manual
Page 67

Brocade ICX 6650 Administration Guide
49
53-1002600-01
Chapter
3
Operations, Administration, and Maintenance
In this chapter
•
•
Software versions installed and running on a device . . . . . . . . . . . . . . . . . . 50
•
•
•
•
Using SNMP to upgrade software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
•
•
•
Loading and saving configuration files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
•
•
Diagnostic error codes and remedies for TFTP transfers . . . . . . . . . . . . . . . 68
•
lists the Brocade ICX 6650 switch and the operations, administration, and maintenance
(OAM) features the switch supports. These features are supported only in full Layer 3 software
images, except where explicitly noted.
TABLE 12
Supported operations, administration, and maintenance features
Feature
Brocade ICX
6650
Flash and boot code verification
Yes
Flash image verification
Yes
Software upgrade via CLI
Yes
Software upgrade via SNMP
Yes
Hitless support:
•
PBR
•
GRE Tunnels
•
IPv6 to IPv4 Tunnels
Yes (PBR only)
Software reboot
Yes
Show boot preference
Yes
Load and save configuration files
Yes
System reload scheduling
Yes
Diagnostic error codes and remedies for TFTP transfers
Yes
IPv4 ping
Yes
IPv4 traceroute
Yes