Brocade Communications Systems Brocade ICX 6650 - Manual (Page 158)

140 Brocade ICX 6650 Administration Guide
53-1002600-01
Displaying global IPv6 information
5
Clearing IPv6 routes from the IPv6 route table
You can clear all IPv6 routes or only those routes associated with a particular IPv6 prefix from the
IPv6 route table and reset the routes.
For example, to clear IPv6 routes associated with the prefix 2001:DB8::/32, enter the following
command at the Privileged EXEC level or any of the Config levels of the CLI.
Brocade#clear ipv6 route 2001:DB8::/32
Syntax: clear ipv6 route [/]
The / parameter clears routes associated with a particular IPv6 prefix.
You must specify the parameter in hexadecimal using 16-bit values between colons
as documented in RFC 2373. You must specify the parameter as a decimal value. A
slash mark (/) must follow the parameter and precede the
parameter.
Clearing IPv6 traffic statistics
To clear all IPv6 traffic statistics (reset all fields to zero), enter the following command at the
Privileged EXEC level or any of the Config levels of the CLI.
Brocade(config)#clear ipv6 traffic
Syntax: clear ipv6 traffic
Displaying global IPv6 information
You can display output for the following global IPv6 parameters:
• IPv6 cache
• IPv6 interfaces
• IPv6 neighbors
• IPv6 route table
• Local IPv6 routers
• IPv6 TCP connections and the status of individual connections
• IPv6 traffic statistics
Displaying IPv6 cache information
The IPv6 cache contains an IPv6 host table that has indices to the next hop gateway and the router
interface on which the route was learned.
To display IPv6 cache information, enter the following command at any CLI level.