Displaying the ipv6 route table – Brocade Communications Systems Brocade ICX 6650 User Manual
Page 163
Brocade ICX 6650 Administration Guide
145
53-1002600-01
Displaying global IPv6 information
5
Displaying the IPv6 route table
To display the IPv6 route table, enter the following command at any CLI level.
Syntax: show ipv6 route [
rip | static | summary]
The
You must specify the
colons as documented in RFC 2373.
The
IPv6 prefix. You must specify the
between colons as documented in RFC 2373. You must specify the
decimal value. A slash mark (/) must follow the
The bgp keyword restricts the display to entries for BGP4 routes.
The connect keyword restricts the display to entries for directly connected interface IPv6 routes.
The ospf keyword restricts the display to entries for OSPFv3 routes.
The rip keyword restricts the display to entries for RIPng routes.
Age
The number of seconds the entry has remained unused. If this value
remains unused for the number of seconds specified by the ipv6 nd
reachable-time command (the default is 30 seconds), the entry is
removed from the table.
Port
The physical port on which the entry was learned.
vlan
The VLAN on which the entry was learned.
IsR
Determines if the neighbor is a router or host:
0 – Indicates that the neighbor is a host.
1 – Indicates that the neighbor is a router.
TABLE 31
IPv6 neighbor information fields (Continued)
Field
Description
Brocade#show ipv6 route
IPv6 Routing Table - 58 entries:
Type Codes: C - Connected, S - Static, R - RIP, O - OSPF, B - BGP
OSPF Sub Type Codes: O - Intra, Oi - Inter, O1 - Type1 external, O2 - Type2 ext
ernal
Type IPv6 Prefix Next Hop Router Interface Dis/Metric
C 2001:DB8:9::/64 :: ve 1009 0/0
C 2001:DB8:a::/64 :: ve 1010 0/0
C 2001:DB8:b::/64 :: ve 1011 0/0
C 2001:DB8:c::/64 :: ve 1012 0/0
C 2001:DB8:d::/64 :: ve 1013 0/0
C 2001:DB8:e::/64 :: ve 1014 0/0
C 2001:DB8:f::/64 :: ve 1015 0/0
C 2001:DB8:10::/64 :: ve 1016 0/0
C 2001:DB8:11::/64 :: ve 1017 0/0
C 2001:DB8:12::/64 :: ve 1018 0/0
C 2001:DB8:13::/64 :: ve 1019 0/0