Brocade Communications Systems Brocade ICX 6650 - Manual (Page 196)

178 Brocade ICX 6650 Administration Guide
53-1002600-01
CDP packets
7
Displaying CDP information
You can display the following CDP information:
• Cisco neighbors
• CDP entries for all Cisco neighbors or a specific neighbor
• CDP packet statistics
Displaying neighbors
To display the Cisco neighbors the Brocade device has learned from CDP packets, enter the show
fdp neighbors command.
To display detailed information for the neighbors, enter the show fdp neighbors detail command.
To display information about a neighbor attached to a specific port, enter a command such as the
following.
Brocade# show fdp neighbors
Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge
S - Switch, H - Host, I - IGMP, r - Repeater
(*) indicates a CDP device
Device ID Local Interface Holdtm Capability Platform Port ID
-------------- ---------------- ------ ---------- ----------- -------------
ICX6650-64 Rou ethernet1/1/1 133 Router ICX6650-64 ethernet1/3/1
ICX6650-64 Rou ethernet1/1/2 133 Router ICX6650-64 ethernet1/3/2
ICX6650-64 Rou ethernet1/1/3 133 Router ICX6650-64 ethernet1/3/3
ICX6650-64 Rou ethernet1/1/4 133 Router ICX6650-64 ethernet1/3/4
(*)CISCO3750 ethernet1/1/5 169 S I cisco WS-C3
GigabitEthernet1/0/5
Brocade# show fdp neighbors detail
Device ID: ICX6650-64 Router
configured as tag-type8100
Entry address(es):
IP address: 10.20.79.91
Platform: ICX6650-64 Router, Capabilities: Router
Interface: ethernet1/1/1
Port ID (outgoing port): ethernet1/3/1 is UNTAGGED in VLAN 1
Holdtime : 133 seconds
Brocade Communications Systems, Inc. ICX6650-64, IronWare Version 07.5.00B1T323
Compiled on Jul 16 2012 at 20:00:20 labeled as ICXLR07500B1
Device ID: ICX6650-64 Router
configured as tag-type8100