Konica Minolta bizhub 25e - Manual (Page 80)

1
2
3
Machine settings
Specifying device settings 3-23
Setting Description Settings
Image
Encoding
Method Specify the image encoding method. MH
MR
MMR
JBIG
Network
Connection
Setting Switches the communication speed and
communication method. Change this
setting when errors occur during network
communication. Auto
100Mbps - Full Duplex
100Mbps - Half Duplex
10Mbps - Full Duplex
10Mbps - Half Duplex
*1 Make sure that the total number of characters of prefix and fax number or suffix and fax
number are within 50 characters..
5
Click [Save].
Click [Back] not to save the setting and return to the “Machine Setup” list screen.
NOTE
Underlined values are the default settings specified at the time of shipment.
Registering the user install
You can specify the settings required for using the machine.
1
Click [Admin Login] in Message Board, and log in (page 1-7) .
This function may also be available on Guest and User login screen, depending on user policy
settings.
2
Click [Machine Settings], and then [Machine Setup].
3
Click “User Install”.
4
Set the detailed information.
For details, see chapter 7, “Initial setup (User Install)” in the Scanner and Fax Guide.
5
Click [Save].
Click [Back] not to save the setting and return to the “Machine Setup” list screen.