Konica Minolta bizhub 25e - Manual (Page 64)

1
2
3
Machine settings
Setting the e-mail environment 3-7
POP Server Setting
Setting Description Settings
POP3 Server
Address Enter the IP address or domain name for the
POP server to use when transmitting e-mail. 50 characters
POP3 Port
Number Enter the POP port number. 0 - 65535: 110
SSL Set “ON” to use SSL communication, or “OFF”
to not use it. ON
OFF
POP3S Port
Number Enter the POP3S port number. 0 - 65535: 995
POP Receive
Authentication Set the POP authentication method when
the POP server you are using requires
authentication. Normal
APOP
POP3 User
Name Enter the account to use when logging on to the
POP3 server. 50 characters
POP3 User
Password
*1
Enter the password to use when logging on to
the POP3 server. 50 characters
Check for new
mail Set whether to check the server for new mail.
To check for new mail, select the periodic
interval to check for mail.
You can specify the time interval between 0
(hours) 0 (minutes) and 99 (hours) 59 (minutes).
When you select “ON”, the interval should be
other than 0.
ON
OFF
Interval:
hr: 0 - 99
min: 0 - 59
10 min.
SMTP Reception
Setting Description Settings
Confirm that the
following domain
is identical to the
receiving domain Set “ON” to check whether the transmission
forwarding path is the same as your domain, or
select “OFF” to not. ON
OFF
Domain for
Receiving Enter the domain name if you set “Confirm
that the following domain is identical to the
receiving domain.” to “ON”. 50 characters
(0 - 9, A - z, @, ., -, _)
Port Number Enter the SMTP reception port number. 0 - 65535: 25
Allow reception
from Enter the IP address or domain name to allow
reception for. Up to five can be registered.
Enter the IP address or domain name in the
entry box, and click [Add].
Select the IP address or domain name to delete
in the “Approved Senders” list, then click
[Delete].
50 characters * 5 set
*1 The password is not displayed on the screen. To change the password, check “Change
Password” and enter the new password.