Konica Minolta bizhub 25e User Manual
Page 31
2-12 Registering
addresses
6
Set the destination.
Setting
Description
Settings
Search
Searches an LDAP server to register destinations in
the address book.
Refer to
“Registering destination using an LDAP
Number
The smallest free number is automatically entered.
You can change it to a number of your choice.
This item is required.
You cannot enter an existing number. However, the
same number can be registered in both the shared
address book and the personal address book.
1 - 9999
Name
Enter the name of the destination.
This item is required.
You cannot enter an existing name. However, the same
name can be registered in both the shared address
book and the personal address book.
30 characters
Fax Number
*1
Enter the fax number of the destination.
The following dialing options are also available:
Option
Description
-
Hyphen.
Makes the entered fax number easier to see.
(Example) 111-1111-1111
/P
Pause.
This is used to open a space between dials.
To increase the pause time, enter multiple
pause options.
(Example) 2/P222-2222-2222
/T
Tone.
This is used to switch from pulse-dialing
to tone-dialing. This option may not be
available in some countries and regions.
/N
Prefix.
This is used to enter a prefix number. To
use a prefix number, register it in advance.
For details, see
(Example) /N333-3333-3333
40 digits
E-mail Address
*1
Enter the e-mail address for the destination.
50 characters
PIN
Enter the PIN.
8 digits, *, #
Super G3
Set whether to transmit with Super G3.
ON
OFF
*1
Either fax number or e-mail address must be entered.