Konica Minolta bizhub 25e - Manual (Page 70)

1
2
3
Machine settings
Setting the LDAP server 3-13
Registering new LDAP server search settings
You can register new LDAP server search settings in Message Board.
NOTE
Up to 5 server settings can be registered.
1
Click [Admin Login] in Message Board, and log in (page 1-7) .
This function may also be available on Guest and User login screen, depending on user policy
settings.
2
Click [Machine Settings], and then [LDAP Server Settings].
3
Click [Add].
4
Set the detailed information.
Setting Description Settings
Name Enter the name to set. 23 characters
LDAP Server
Address Enter the name or IP address (IPv4 only) of the
LDAP server to set. This item is required. For an LDAP server
name, 99 characters
Use the XXX.XXX.
XXX.XXX format for
an IP address. (Where
XXX is a number
between 0 and 255.)
Port Number Enter the port number of the LDAP server to set. 0 - 65535: 389