Kramer Electronics WP-501 - Manual (Page 91)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
The Kramer K-Config Menus
84
Figure 175: Export Device xml
10.2 The Device Menu
Figure 17 illustrates the Device menu and 6 Table 1 defines it: 7
Figure 176: The Device Menu
Table 17: Device Menu Features
Menu Command Function
Connect… Click to connect to a device via an IP number, a USB connector or
a serial port
(see Figure 178 )
Disconnect Click to disconnect the device
Write Configuration
1 Writes the configuration to the device
Read Configuration
1 Reads the configuration from the device
Load Firmware Load file for firmware upgrade.
Clear Device
Configuration
Removes the configuration from the device
10.2.1 Load Firmware
Warning: Before uploading a new firmware to a device, make certain that the firmware you have
selected matches the connected device. In some cases, it will be possible to upload firmware
that does not match a device, resulting in inoperability of the device.
Prior to firmware upgrade, disconnect the device from Site-CTRL and Web Access.
To load new firmware:
1. Check for the latest firmware at:
2. From the Device menu select Load Firmware.
The Load Firmware Upgrade window appears:
http://www.kramerelectronics.com/support/downloads.asp
1 Active only when a device is connected