Kramer Electronics WP-501 - Manual (Page 68)

The Driver Manager
61
# Feature Function
5 Command Area Displays the command type and command string
6 IR Commands Area (see Section
9.1.2
Lists the IR command names for a specific device
New: click to enter a new command name manually
Rename: click to rename the Command editing tab
Delete: click to erase the selected command
Duplicate: click to duplicate an IR command
)
7 Serial Commands Area
(see Section 9.1.1
Lists the outgoing (for control over) and incoming (for Monitor Events) serial
command names for a specific device
New: click to enter a new command name manually
Rename: click to rename the Command editing tab
Delete: click to erase the selected command
Duplicate: click to duplicate a serial command
Up/Down: move a command up or down , respectively
Right click a serial command to color it red, green, blue or black (this is convenient for
grouping command types), see
)
Figure 133
8 Tables (see Section 9.1.3 Displays the list of command tables )
9 Queries Displays the Queries list. Select a query and click Query Details to display the details
(see Section 9.1.3
10
)
Device Default Power Commands
Area
Set the command that will execute the projector’s Power off and Power On command
in the Web pages (in the Web Access Devices tab). Select a Serial or IR command
form the lists, and then press "Set command" On or Off to assign
11 Drivers Area Import Drivers…: Click to import one or more driver files
Export Driver…: Click to export a driver file
12 Groups Area Include a set of serial or IR commands into a group that will be displayed as such in
the Web pages
13 Serial Settings Area Select the serial settings for the device: the Baud Rate, the Data Bits, the Parity and
the Stop Bits
14 OK Button Apply changes and close window
15 Cancel Button Close window without applying changes
16 Apply Button Apply changes without closing the window
9.1 Creating a Driver Command
You can write the following types of commands:
• Serial commands (see Section 9.1.1
• IR commands (see
)
Section 9.1.2
• Serial range commands (see
)
Section 9.1.3
9.1.1 Creating a Serial Command
)
The serial commands can be sent via RS-232 and RS-485 ports. To create a new serial command
for the selected device, click the New button in the Serial Commands area. The New Serial
Command window appears. Type the new command name:
Figure 131: New Serial Command Window