2 available commands for room control ports, Available commands for room control ports, Table 2: room controller commands available – Kramer Electronics WP-501 User Manual
Page 9

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Introduction
2
1.2 Available Commands for Room Control Ports
Since each Room Controller includes different ports
, you will find that not all the available
commands apply to your room controller.
defines the sections that apply to each room controller:
Table 2: Room Controller Commands Available
Machine
IR OUT
RS-232
RS-485
Ethernet
GPI/O
Relay
Switcher
Power
Amplifier
LCD Label
Button Light
RC-2
RC-2C
RC-52
RC-52N/A
SV-551
See note 1
See note 1
SV-552
See note 1
See note 1
SL-1
See note 1
See note 1
RC-6x
RC-6xL
SL-14RC/N
See note 1
RC-74DL
RC-53D
RC-53DLC
RC-54DL
RC-5B2, RC-5B4
RC-3TB/U
See note 3
RC-13TC
WP-500
WP-501
VP-31KSI
VP-81KSI
SL-12
See note 1
See note 1
SL-10
See note 1
See note 1
Virtual Device
Machine
Ignore Button
Panel Lock
Delay
Timer Start/Stop
States
LEDs Light
RC-2
RC-2C
RC-52
RC-52N/A
SV-551
See note1
See note1
See note 1
See note 1
SV-552
See note1
See note1
See note 1
See note 1
SL-1
See note1
See note1
See note 1
See note 1
RC-6x
RC6xL
See note 2
SL-14RC/N
RC-74DL
RC-53D
RC-53DLC
RC-54DL
RC-5B2, RC-5B4
RC-3TB/U
RC-13TC
WP-500
WP-501
VP-31SKi
VP-81KSI
SL-12
See note1
See note1
See note 1
See note 1
SL-10
See note1
See note1
See note 1
See note 1
Virtual Device
Note 1: This command can be available, depending on the auxiliary device connected to the Master room controller
Note 2: Only for digital models (for example, the
RC-63DL)
Note 3: The device mimics the button light commands of
SL-14RC
1 For example, the RC-2 includes only an RS-232 port, so the other commands are not available for this machine