4 the button ignore action type, 5 the set lcd label action type, Figure 108: button color selection – Kramer Electronics WP-501 User Manual
Page 59: Figure 109: button ignore states, Figure 110: set lcd label text, Figure 108
KRAMER: SIMPLE CREATIVE TECHNOLOGY
The Triggers
52
Select the button light from the Color Selection Window
Figure 108: Button Color Selection
Some machines buttons accept a limited selection of colors or are preset to one color (for example,
the RC-53D or the RC-2C.
6.11.4
The Button Ignore Action Type
shows the available button ignore states:
Figure 109: Button Ignore States
Set the selected button state to Ignore to disable it. Unignore enables the button.
For example, disable the source selection button when the projector is OFF; this command will
prevent source switching while the projector is OFF.
6.11.5
The Set LCD Label Action Type
The Set LCD Label command lets you type in new text labels to the LCD button labels for the
available devices in the control room, see
Figure 110: Set LCD Label Text
1
Not available for the RC-53 Series