Kramer Electronics WP-501 - Manual (Page 62)

The Triggers
55
Figure 118: Select LEDs to Light
6.11.11 The States Action Type
The States action type appears in the action type list only after the button behavior is defined as
States (see Section 6.9.1
The States action type lets you select the state of a button, and by that determine the action list
(written for each state) that will be carried out the next time the button will be pressed. Upon system
startup, all states and toggles are set to State #1.
).
In the following example, button 3 behavior includes 4 states:
Figure 119: Definition of 4 States
1. Click OK.
Button 3 appears in the Available Triggers list: