Kramer Electronics WP-501 - Manual (Page 46)

The Triggers
39
Figure 71: Active Button Trigger Action List
Step III: Define the Monitor Event
9. Add a monitor event trigger and select the ON reply from ON command:
Figure 72: Add the Monitor Event
Once the projector power is ON, the ON reply from ON activates the monitor event action(s):
10. Add the required action to the trigger (Stop):
Figure 73: Monitor Event Action List
Once the projector replies, the monitor event command is executed, the timer trigger is stopped and
normal operation is carried on.
The command list, shown in
Figure 72 , includes "ON reply from OFF". In some cases, the AV
device will reply differently to the same question, depending on its state. When building timers
combined with monitor event structures, be certain to take into account the various replies that
might come back from the AV device and handle each one of them with an appropriate Monitor
Event trigger.